THE BEST UPS SOLUTIONS
Through its experience and knowledge, SDM-Projects is the added value for Legrand's UPS systems.
SDM-Projects does the study, installation, commissioning and service of large Legrand UPS systems from 50 kVA and up.
Integration in total projects is their specialty.
Our engineers are trained for Legrand UPS systems and we offer standard installations, but also build UPS systems in containers, concrete cabins or in combination with a total energy critical installation.
UPS PRODUCTS

Keor COMPACT
UPS 10-15-20 kVA.
- Keor Compact is a three-phase, double-conversion UPS of 10-15-20 kVA.
- With its compactness and easy installation and use, Keor Compact is perfect for all typical three-phase small power applications, especially for small engineering spaces.

Keor MOD
MODULAIR UPS Up to 250 kW
- Keor MOD is a three-phase dual-conversion UPS with PWM high-frequency technology, modular architecture up to N+X redundancy.
- From 25 to 250 kW and each unit can be connected in parallel to identical or different units up to 600 kW.
- The batteries are lead-acid, sealed, maintenance-free, valve-controlled and placed in the UPS up to 125kW.
- Keor MOD is the ideal solution for all critical computing applications such as data centers.

Keor HPE
UPS 60 up to 600 kVA
- Three Phase UPS On-line Double Conversion with 3-Level IGBT technology, PWM high frequency and with the ability to be connected in parallel for N+X redundancy up to a total of 6 units.
- It delivers rated power of 60-80-100-125-160-200-300-400-500-600kVA.
- Keor HPE with its high efficiency and reliability delivers continuous high-quality energy for critical loads in tertiary, industrial, healthcare and transportation applications.

Keor XPE
UPS 600 up to 2100 kVA
- Keor XPE is a complete scalable UPS system based on 250 kVA or 300 kVA power units and can reach up to 2.1 MVA rated power.
- With on-line double conversion, advanced technology, high-quality materials and an attractive design, the Keor XPE is the ideal solution for data centers and large power-critical applications (tertiary, hospital, industrial, transportation) where service continuity, high-quality power supply and low consumption are a must.
THE POWER OF SDM Projects
SDM-Projects' strength is our engineers with their extensive project knowledge, vast experience, training and efficient programming of complex energy-critical installations.
Keor Compact Three - Hase UPS 10-15-20 kVA
- PFC power factor correction (input PF>0.99)
- User-friendly 4.3″ touchscreen
- Wide range of input voltages and frequencies
- Dual input
- Cold start function
- Integrated backfeed protection
- Smart communication ports and SNMP management capability Parallel system up to 6 units possible Internal battery for standard autonomy
- Extended backup time with battery cabinets
- Short circuit and overload protection
- Powerful built-in charger RS232, dry contacts
- Compatible with gensets
- Compact size, lightweight and low noise level
- Limited footprint: 0.22 m2 Wheels for easy installation and maintenance
- This product requires parameterization! *

Keor HPE Three - Phase UPS 60 Up to 600 kVA
Keor HPE UPS is a three-phase uninterruptible power supply On-line Double Conversion with 3-Level IGBT technology, PWM high frequency and with the ability to be connected in parallel for N+X redundancy up to a total of 6 units.
It delivers rated power of 60-80-100-125-160-200-300-400-500-600kVA. Keor HPE with its high efficiency and reliability delivers high quality continuous power for critical loads in tertiary, industrial, healthcare and transportation applications.
- 60-600kVA Capacity
- PF 1 (kVA=kW)
- 3-phase input / 3-phase output
- 3-level IGBT converter
- High efficiency
- LCD/Touch Screen Display
- Digital signal processor (DSP)
- Input factor correction (PFC).
- Parallel capacity up to 6 units 2N & N+1 redundancy
- 2N Synchronization
- Smart charge cycle battery
- Suitable for aggregate operation
- Optimized ventilation against wall mounting
- Operation and maintenance accessible from the front
- Full IT connectivity
- Wide range of optional features and accessories
Keor HP Three - Phase UPS - 60 up to 800 kVA
The three-phase UPS is available in three cabinet types with a total output of up to 4.8 MVA
- Conventional three-phase UPS with double conversion online VFI
- The optimized cooling system allows the UPS to be placed against the wall and next to other equipment without affecting performance.
- Full access allows easy installation and quick maintenance.
- To increase the power output, depending on the power demanded, it is possible to operate in parallel up to 6 units of the same power. This allows a total power output of up to 4.8 MVA.
- Options
Empty battery box with cables and protection
Battery life 5 years / 10 years
in cabinets or racks
Battery switch box with protection:
fuses
Battery monitoring system
BY PASS isolation transformer
External by-pass for maintenance
Cable box with top entry
Remote control panel

Keor MOD Three - Phase UPS 60 up to 800 kVA
Keor MOD is a three-phase uninterruptible power supply on line with double conversion with PWM high frequency technology, modular architecture with the possibility of N+X redundancy. It delivers rated power from 25 to 250 kW and each unit can be connected in parallel to identical or different units up to 600 kW.
The batteries are lead acid, sealed, maintenance free, valve regulated and placed in the UPS up to 125kW. Keor MOD is the ideal solution for all critical computing applications such as data centers.
High redundancy, high power density, user-friendly and a modern, stylish design. These are the strengths of the new Keor Mod modular UPS concept that Legrand is adding to its wide range of products.
Power modules
- Each power module in a Keor Mod constellation is a UPS, with an output of 25 kW. Such a power module is compact (height 8 cm) and operates completely independently.
- Each UPS has an LED strip that lights up in green, orange or red, indicating the status of the unit.
- A latch ensures that a power module can be changed under voltage.
In a cabinet arrangement with multiple power modules, one is always on standby to take over from another, such as in the event of a power failure.
A major advantage for data centers, where there is usually little area available to house the necessary power, is that by placing multiple enclosures on top of each other, a high power density can be achieved.
A parallel solution is also possible. This also provides redundancy when the UPSs are placed horizontally next to each other and guarantees operation should a cable problem occur.
Other advantage: power modules and modular battery drawers can be prepared before they are in the cabinet
Two different Keor Mod cabinet configurations are possible. The first consists of five power modules and ten battery drawers and has a total capacity of 125 kW; the second houses up to ten power modules, good for 250 kW.
Both versions stand out for their reduced footprint, smaller than 1 m² with open door. The cabinets have an integrated service bypass and are easily accessible at the front for maintenance.
The display in the door rotates 180°. A clever feature to avoid having to walk around the door each time during installation or maintenance. The display, which looks like a tablet, shows the current status of each UPS and can also be consulted remotely.
Keor XPE Three - Phase UPS 600 up to 2100 kVA
- Keor XPE is a complete scalable UPS system based on 250 kVA or 300 kVA power units up to 2.1 MVA.
- Power units, each with its own logic controller, can be combined with others to achieve the required power, or implement redundant configurations.
- Expansion of power can easily be done at a later stage by installing additional power units.
- Keor XPE is the ideal solution for data centers
and large power critical applications (tertiary,
hospital, industrial, transportation) where continuity
of service, high quality power supply
and lower consumption are required.
- High reliability and availability
- The ability to have two independent
- Keor XPE in synchro keep allows 2 independent and redundant lines to achieve the highest availability typical of hypercritical data centers.
Smart display
- The centralized 10" touchscreen display, with intuitive and user-friendly interface, allows the user to and both fully monitor and control the overall system and individual power supply units.
- The display also provides full diagnostics, system logs and a host of advanced settings and fine-tuning functions in 10 different languages.


